Remote Agent
Posted: Wed Jul 27, 2016 4:34 pm
I am slowly learning Ranorex as part of our evaluation for my company and am having trouble with the Remote Agent.
- I am running a full Ranorex installation on a VM (VM1), and a second VM spun up (VM2).
- OS for both VMs is Windows Server 2012 R2.
- All firewalls off on both VMs.
- VMs are IP'd on the same private subnet, on their own vLAN with no internet access.
- Remote Agent is fully installed on VM2 when it had internet access.
- VM1 Ranorex successfully connected to VM2 Remote Agent on initial configuration.
- On VM1, after 5-10 seconds, the VM2 listed in the Agents grays out with: "VM2: Failed to Connect to agent."
- I can hit reload, and it connects for another 5-10 seconds. In that brief window I can send over a test which is executed, and view the logs.
- Details show "Messenger connection to <IPADDRESS>:8081/api/ failed."
- I have rebooted the VMs multiple times.
- VM1 and VM2 are both clones from a base template, so with Ranorex running fine on VM1 (and executing tests fine), I don't think there is a dependency issue such as .net or other configurations.
Any ideas?
- I am running a full Ranorex installation on a VM (VM1), and a second VM spun up (VM2).
- OS for both VMs is Windows Server 2012 R2.
- All firewalls off on both VMs.
- VMs are IP'd on the same private subnet, on their own vLAN with no internet access.
- Remote Agent is fully installed on VM2 when it had internet access.
- VM1 Ranorex successfully connected to VM2 Remote Agent on initial configuration.
- On VM1, after 5-10 seconds, the VM2 listed in the Agents grays out with: "VM2: Failed to Connect to agent."
- I can hit reload, and it connects for another 5-10 seconds. In that brief window I can send over a test which is executed, and view the logs.
- Details show "Messenger connection to <IPADDRESS>:8081/api/ failed."
- I have rebooted the VMs multiple times.
- VM1 and VM2 are both clones from a base template, so with Ranorex running fine on VM1 (and executing tests fine), I don't think there is a dependency issue such as .net or other configurations.
Any ideas?